Record Power 61062, SC3 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, 1" x 8 TPI Direct Thread

The SC3 chuck is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact...

Record Power 61064, SC3 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, 3/4" x 16 TPI Direct Thread

The SC3 chuck is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact...

Record Power 61066, SC3 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, 1 1/4" x 8 TPI Direct Thread

The SC3 chuck is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact...

Record Power 62063, SC4 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, 1 1/4" x 8 TPI Insert

The SC4 is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed...

Record Power 62063, SC4 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, 1" x 8 TPI Insert

The SC4 is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed...

Record Power 62063, SC4 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, 3/4" x 16 TPI Insert

The SC4 is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed...

Record Power 62063, SC4 Chuck Kit with Standard Jaws and 3 1/2" Faceplate, No insert included

The SC4 is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed...

Record Power 62574, 5” Faceplate Ring for the SC3 and SC4 Chuck

This large faceplate ring is ideal for holding large bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set...

Record Power 62317, Extra Large Dovetail Jaws for the SC3 and SC4 Chuck

Featuring a specialised dovetail profile, these jaws are ideal for turning up to 30” bowls. They also feature a reverse dovetail for a contracting grip on large spigots.The Record Power SC range of...

Record Power 62321, Small Dovetail Jaws for the SC3 and SC4 Chuck

These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for...

Record Power 62322, Heavy Bowl and Gripper Jaws for the SC3 and SC4 Chuck

These new jaws are ideal for heavy bowls and vases. The wide front face provides a good register for the base of the bowl or vase and the deep toothed body provides strong grip on the spigot. The...

Record Power 62323, Long Nose Jaws for the SC3 and SC4 Chuck

These extremely flexible jaws feature internal and external dovetails for bowl work. The deep internal grip is versatile but main benefit of these jaws is to project the work away from the chuck,...

Record Power 62327, Pin Jaws Set with 9mm Bore for the SC3 and SC4 Chuck

The new pin jaws have been improved by squaring the external shoulder to allow workpieces to properly register against the back of the jaws. This is ideal for use in expansion, to grip tubes in work...

Record Power 62329, Power Grip Large Dovetail and Deep Gripper Jaws for the SC3 and SC4 Chuck

Featuring a specialised dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a...

Record Power 62336, Mini Spigot Jaws for the SC3 and SC4 Chuck

To complement the new pin jaws, the mini spigot jaws have also been improved. These jaws perform many of the same tasks in expansion and the extra screw hole profiles and added teeth to the outside...

Record Power 62337, Pen Jaws for the SC3 and SC4 Chuck

These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible...

Record Power 62356, Mini Cole Jaws for the SC3 and SC4 Chuck

Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning...

Record Power 62377, Mega Cole Jaws with Angled Buffers for the SC3 and SC4 Chuck

The Mega Cole Jaws have increased capacity of Record Power larger remounting jaws, whilst ensuring they can still clear the bed of lathes with the popular 12” swing capacity and are capable of...

Record Power 62378, Plastic Soft Jaws for the SC3 and SC4 Chuck

These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without...

Record Power 62572, 3 1/2” Faceplate Ring for the SC3 and SC4 Chuck

This faceplate ring is ideal for holding medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set...

Record Power 62811, Spur Drive Center

This useful center is held in the chuck with the 50mm (2") standard jaws to give a quick-mount solution for spindle turning, meaning the chuck doesn't need to be removed from the lathe.Record Power...

Record Power 103510, 3/4" Spindle Roughing Gouge (12" Handle)

Record Power 3/4" Spindle Roughing Gouge made from High Speed Steel with Solid Beech HandleBehind all Record Power turning tools is over 100 years experience in the manufacture of fine edged tools...

Record Power 103520, 1" Spindle Roughing Gouge (12" Handle)

Record Power 1" Spindle Roughing Gouge made from High Speed Steel with Solid Beech HandleBehind all Record Power turning tools is over 100 years experience in the manufacture of fine edged tools for...

Record Power 103530, 1 1/4" Spindle Roughing Gouge (16" Handle)

Record Power 1 1/4" Spindle Roughing Gouge made from High Speed Steel with Solid Beech HandleBehind all Record Power turning tools is over 100 years experience in the manufacture of fine edged tools...