Hurricane, Pen Turners Jaws for the HTC125 Chuck

Hurricane Pen Turners Jaws are the perfect solution for those who want to drill their pen blanks on the lathe. This is an easy and accurate way to drill holes through the center of your pen or project blank. In expansion mode, they also have a second...

Hurricane, Large Dovetail Jaws for the HTC125 Chuck

Dovetail jaws are usually used for turning bowls and can be used in compression or expansion mode. In compression mode, they are used to grip down on a tenon. In expansion mode, they expand into a dovetail recess. They are the most popular jaws and...

Hurricane, Deep Profile Large Dovetail Jaws for the HTC125 Chuck

This new jaw profile is exclusive to Hurricane! Our deep profile dovetail jaws are 3/4" deep with a jaw face of 5/8" for superb gripping power for mid-size to larger bowls. Avaleable in "Large" size for the HTC100 and HTC125 and "Extra-Large" for the...

Hurricane, 15" Convertible Jumbo / Cole Chuck Jaw Kit for the HTC125 Chuck

This jaws set consists of our 10" convertible plates with a set of expanson plates that take the overall diameter to 15". Our new design is made from lightweight cast aluminum for less inertia as compared to the original steel design. Cole Jaws...

Hurricane, 10" Convertible Jumbo / Cole Jaws for the HTC125 Chuck

Our new design is made from lightweight cast aluminum for less inertia as compared to the original steel design. Cole Jaws (regardless of brand) are designed for light finishing cuts on the foot of a bowl or platter. They are NOT designed for heavy...

Hurricane, Spigot Jaws for the HTC125 Chuck

Spigot jaws are used holding small items like a box or lid. They are very useful for holding inside a candlestick. The outside jaws are serrated.Features:Spigot jaws are used in for holding small items like a box or lid; in compression mode, they can be...

Hurricane, Large Serrated Jaws for the HTC125 Chuck

Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or for internal holding within a recess. They can be used for this but they are not as strong as dovetail jaws. Great for holding a candlestick, goblet,...

Hurricane, Pin Jaws for the HTC125 Chuck

Pin jaws are for small work and have several uses. The dovetail is set away from the flat jaw surface by about 1 inch. This gives you better access to the bottom of the bowl for easier tool work while your bowl is on the lathe.Features:Pin jaws are for...

Hurricane, Step Jaws for the HTC125 Chuck

Step jaws are used in expansion mode for internal holding within a straight wall. Normally, these are used for holding small items like a box or lid. In compression mode, they can hold very small items as they close down to almost zero.Features:Step...

Hurricane, Serrated Jaws for the HTC125 Chuck

Some turners use the serrated jaws instead of dovetail jaws in compression mode for gripping a tenon or for internal holding within a recess. They can be used for this but they are not as strong as dovetail jaws. Great for holding a candlestick, goblet,...

Hurricane, Extra Large Dovetail Jaws for the HTC125 Chuck

These Extra Large Dovetail jaws are possibly the largest dovetail jaws readily available for woodturning chucks. Designed for turning large bowls on full size lathe. This jaw profile is exclusive to Hurricane! Our deep profile dovetail jaws are 3/4"...

Hurricane, Standard Dovetail Jaws for the HTC125 Chuck

Dovetail jaws are usually used for turning bowls and can be used in compression or expansion mode. In compression mode, they are used to grip down on a tenon. In expansion mode, they expand into a dovetail recess. They are the most popular jaws and...

Hurricane, Aluminum Jumbo / Cole Jaws for the HTC125 Chuck

Our new design is made from lightweight cast aluminum for less inertia as compared to the original steel design. Cole Jaws (regardless of brand) are designed for light finishing cuts on the foot of a bowl or platter. They are NOT designed for heavy...