Axminster, APTC Multi Head Live Center, #2 MT

There are two sealed bearings in the body and the working end has a taper for mounting the various interchangeable tips, guaranteeing that they run perfectly concentric. There is an ejector ring behind the tip which is operated by two tommy bars. The...

Axminster, APTC Multi Head Live Center, #1 MT

There are two sealed bearings in the body and the working end has a taper for mounting the various interchangeable tips, guaranteeing that they run perfectly concentric. There is an ejector ring behind the tip which is operated by two tommy bars. The...

Axminster, Hollow Live Center with Chip Ejection, #2 MT

An excellent improvement to our standard hollow live centre, this Evolution Series centre features three chip ejection ports so that during use the bit doesn't have to be completely withdrawn from the tailstock. With short and long removable points, twin...

Axminster, Live Revolving Center, #1 MT

With numerous large capacity lathes now available, Axminster decided to design and make a bigger, high quality, heavy duty live tailstock centre specifically for woodturners, as in the past these centres have been produced for metalworkers. The centre...

Axminster, Live Revolving Center, #2 MT

With numerous large capacity lathes now available, Axminster decided to design and make a bigger, high quality, heavy duty live tailstock centre specifically for woodturners, as in the past these centres have been produced for metalworkers. The Evolution...

Axminster, APTC Revolving Ring Center, #1 MT

When using small section brittle timber, splitting may be reduced by using a ring centre. The dimensions of the ring and point exactly match those of the Cone Friction Drives 340125 and 340126, allowing the work to be reversed in the lathe if required...

Axminster, Standard Live Center, #2 MT

The most familiar of the live revolving centres and the one that most of us use. This 60° live revolving centre is made from top quality materials, incorporates two 'sealed for life' dust proofed bearings and will cover 90% of all turning applications...

Axminster, Mini Live Center, #2 MT

Axminsters miniature live revolving centre with a 22mm diameter head and twin bearings is also of the extended nose form, for two reasons. Firstly, tool access is most important when turning very small items and, secondly, the 90° nose has far less...

Axminster, APTC Revolving Ring Center, #2 MT

When using small section brittle timber, splitting may be reduced by using a ring centre. The dimensions of the ring and point exactly match those of the Cone Friction Drives 340125 and 340126, allowing the work to be reversed in the lathe if required...

Axminster, Pro Live Center, 7/8" (21mm) Diameter, #2 MT

The Axminster Evolution 21mm Pro Live Centre 2MT exactly matches the Axminster Evolution Series 21mm Pro Drive. Like the drive centre, it features a spring-loaded, stainless steel centre point. The spring tension is variable; the adjustment is a simple...

Axminster, Pro Live Center, 5/8" (16mm) Diameter, #2 MT

The Axminster 16mm Pro Live Centre 2MT exactly matches the Axminster 16mm Pro Drive. Like the drive centre, it features a spring-loaded, stainless steel centre point. The spring tension is variable; the adjustment is a simple matter of turning a grub...

Axminster, Ring Center Converter

An inspired idea from Axminster's engineering and manufacturing department. This useful piece of kit turns any 60° live centre into a tailstock ring centre or cup centre. This converter has a 60° internal angles, so all you need do is simply slip it...

Axminster, 90 Degree Pipe Center for Multi Head Live Center

Pipe centre for use with the Axminster multi-head live revolving centre. 90° pipe centre is used when locating in a pre-bored hole.Features:90° pipe centreLocates in a pre-bored hole⚠ WARNING: Drilling, sawing, sanding or machining wood products can...

Axminster, Spare Point Set for Hollow Live Center

Replacement point set for hollow live centre. A set of two replacement points for your hollow live centre. The short point protrudes a mere 3mm beyond the ring and allows an accurate impression of the ring to be made on the end of the timber. Having made...

Axminster, Conical Center for Multi Head Live Center

Conical centre for use with the Axminster multi-head live revolving centre. An internal cone for quick centring on small work or as a support when turning spherical forms.Features:Quick centring on small workSupport when turning spherical formsAll sizes...

Axminster, Ring Point Tip for Revolving Center

The Ring Point applies pressure to your work over a relatively wide area making it particularly useful for delicate timber or soft wood liable to split. You can adjust the amount of compression to suit the timber. The 8mm diameter matches the ring drive...

Axminster, Dale Nish Tip for Revolving Center

The Dale Nish Extended Nose Centre has a modified point. In place of the standard 60° is an 8mm long 30° point, giving better penetration into the wood and reducing the wedge effect, which helps minimise the risk of splitting.Features:Dale Nish Extended...

Axminster, Conical Tip for Revolving Center

The Conical Centre is perhaps the most useful. The 28.5mm (1 1/8") internal cone self-centres your work either for turning small spindles or sanding previously turned items. This also works exceptionally well as support on a curved surface or simply...

Oneway, Live Center Set, #1 MT

Oneway #1 MT Live Center - Complete PackageOneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Oneway, Live Center Set, #3 MT

Oneway #3 MT Live Center - Complete PackageOneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Oneway, Live Center, #1 MT

Oneway #1 MT Live Center - Body OnlyOneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Oneway, Live Center, #2 MT

Oneway #2MT Live Center - Body OnlyOneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Oneway, Pen Turning Point

Oneway Pen Turning Point is small, made from steel, and attaches to the Live Center.Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made...

Oneway, Live Center Adapter, 3/4" x 10 TPI to 1" x 8 TPI

Oneway Live Centre Adaptor 3/4-10 to 1-8Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Oneway, Live Center Adapter, 3/4" x 10 TPI to 3/4" x 16 TPI

Oneway Live Centre Adaptor 3/4-10 to 3/4-16Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Oneway, Live Center Adapter, 3/4" x 10 TPI to 1 1/2" x 8 TPI

Oneway Live Centre Adaptor 3/4-10 to 1 1/2 - 8Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made in their factory in Stratford,...

Robust, Live Center and Cone Set, #2 MT

Robust Live Center and Cone Set Combo - #2MTFeatures:Cone Set includes aluminum tip and reversible 4″ Bull Nose Set; fits other manufacturer’s centers with 3/4-10 threadsThe tip of the center extends and reverses to accommodate your turningThe cup center...

Robust, Cone Set for Live Center

Robust Cone Set for Live CenterFeatures:Cone Set includes aluminum tip and reversible 4″ Bull Nose Set; fits other manufacturer’s centers with 3/4-10 threadsThe tip of the center extends and reverses to accommodate your turningThe cup center is threaded...

Hurricane, Live Tailstock Center, Cup Point, #2 MT

Hurricane Standard Series Live Tailstock Center with cup and point for all lathes with a 2MT tailstock. Every woodturner needs a revolving live center for supporting their work when turning "between centers" on the lathe.Features:Revolving live center...

Hurricane, Live Tailstock Center, 60 Degree Point, #1 MT

Hurricane Standard Series Live Tailstock Center with 60-n++ point for all lathes with a 1MT tailstock. Every woodturner needs a revolving live center for supporting their work when turning "between centers" on the lathe.Features:Revolving live center for...

Hurricane, Live Tailstock Center, 60 Degree Point, #2 MT

Hurricane Standard Series Live Tailstock Center with 60-n++ point for all lathes with a 2MT tailstock. Every woodturner needs a revolving live center for supporting their work when turning "between centers" on the lathe.Features:Revolving live center for...

Hurricane, Live Tailstock Center, 3/4" Spur, #2 MT

Hurricane Standard Series Live Tailstock Center with 3/4" Spur point for all lathes with a 2MT tailstock. Every woodturner needs a revolving live center for supporting their work when turning "between centers" on the lathe.Features:Revolving live center...

Hurricane, Cup Center Converter for 60 Degree Point Live Center

Hurricane Standard Series Cup Center Converter for 60 Degree Point Live Tailstock Center. Every woodturner needs a revolving live center for supporting their work when turning "between centers" on the lathe.Features:Revolving live center for supporting...