SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Hollow Form Jaws for the SK114 Chuck MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Pen Jaws MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Dovetail Jaws Type M MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, 250mm Button Jaws MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Dovetail Jaws Type A Plus MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Faceplate Ring For Use with Type C Dovetail Jaws MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Screw Chuck to Fit Type C Dovetail Jaws MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK114 Chuck MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Jaw Rack MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK100 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Accessory Mounting Jaws for the SK80 Chuck MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Axminster Woodturning Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster Woodturning Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) MSRP: Now: $269.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Axminster, Clubman SK100, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Clubman SK80, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Axminster, Clubman SK100, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Evolution SK114, Chuck Body with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Clubman SK80, Chuck Package with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $239.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Clubman SK100, Chuck Body with 1" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Evolution SK114, Chuck Package with 1 1/4" x 8 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $319.99 Add to Cart Compare Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Hollow Form Jaws for the SK114 Chuck When turning a hollow form you need a secure solution for gripping large lumps of timber. These stainless steel jaws are designed specifically to do that job by providing tremendous grip and an aggressive hold on the workpiece. They fit the Axminster... MSRP: Now: $124.99 Add to Cart Compare Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Pen Jaws Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on the lathe. The Pen Jaws are 42mm (1 5/8") deep and can... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Dovetail Jaws Type M SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at a true circle the external diameter is 125mm (5") and... MSRP: Now: $84.99 Add to Cart Compare Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a cap head screw, making fitting and changing simple... MSRP: Now: $159.99 Add to Cart Compare Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, 250mm Button Jaws These 250mm (9 13/16") Button Jaws are named after the eight conical white rubber buttons used to grip the work and pull it securely back against the aluminium jaw plates. The arrangement offers a method of reverse chucking and holding a previously... MSRP: Now: $104.99 Add to Cart Compare Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Dovetail Jaws Type A Plus Dovetail jaws are by far the most secure and most accurate method of holding a bowl or platter on the lathe during turning. Made in Axminster these SK100 4" Dovetail Jaws Type A Plus will grip onto an 80mm (3 1/8") diameter 15° dovetailed spigot or... MSRP: Now: $69.99 Add to Cart Compare Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Faceplate Ring For Use with Type C Dovetail Jaws Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the chosen blank with woodscrews and expand the dovetail jaws... MSRP: Now: $29.99 Add to Cart Compare Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, 4 Prong Drive, 1" Diameter, For Type C Dovetail Jaws The Axminster four prong parallel drive centre has been designed to be used in the central bore of the C jaws fitted to the Evolution, and 100mm Clubman chucks. It has principally been produced for those lathes that do not have a hollow headstock, but... MSRP: Now: $35.99 Add to Cart Compare Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Screw Chuck to Fit Type C Dovetail Jaws Two replaceable stainless steel parallel screw chucks which fit into either the 62mm recess of the A dovetail jaws, or the internal recess of the 100mm or 114mm C dovetail jaws. Particularly useful for the initial mounting of bowl blanks whilst the... MSRP: Now: $42.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Accessory Mounting Jaws for the SK114 Chuck These accessory mounting jaws are the latest accessory for the Axminster Evolution SK114 4 1/2" chuck. Manufactured in Axminster, they are a precision fit in the SK114’s jaw slides. An additional set of accessory mounting jaws allows faster jaw changes... MSRP: Now: $54.99 Add to Cart Compare Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Jaw Rack This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than rummaging around in a box. The 4 slots at 80mm centres take... MSRP: Now: $24.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Accessory Mounting Jaws for the SK100 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An additional set of accessory mounting jaws allows faster... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Accessory Mounting Jaws for the SK80 Chuck These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK80 chuck. Manufactured in Axminster, they are a precision fit in the SK80’s jaw slides. An additional set of accessory mounting jaws allows faster jaw... MSRP: Now: $49.99 Add to Cart Compare Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Clubman SK100, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $209.99 Add to Cart Compare SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Axminster, Clubman SK100, Chuck Package with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: $259.99 Was: $259.99 Now: $233.99 Add to Cart Compare Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Clubman SK80, Chuck Body with 3/4" x 16 TPI Direct Thread More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $199.99 Add to Cart Compare Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Axminster, Evolution SK114, Chuck Body with M33 x 3.5mm Direct Thread (reverse locking) More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over... MSRP: Now: $269.99 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected