Oneway 22” Easy Core Base System

Oneway 22” Easy Core base set without clamp block. The Oneway Easy-Core Coring System utilizes a unique method of supporting the cutting arm during the coring process to make coring an enjoyable and effortless experience for even the novice turner. With...

Oneway 9” Easy Core Bowl Coring Knife Set, with Carbide Cutter

Oneway 9” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is supplied...

Oneway 13 1/2” Easy Core Bowl Coring Knife Set, with Carbide Cutter

Oneway 13 1/2” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is...

Oneway 11 1/2” Easy Core Bowl Coring Knife Set, with Carbide Cutter

Oneway 11 1/2” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is...

Oneway 16 1/4” Easy Core Bowl Coring Knife Set, with Carbide Cutter

Oneway 16 1/4” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is...

Oneway 24” Easy Core Base System

Oneway 24” Easy Core base set without clamp block. The Oneway Easy-Core Coring System utilizes a unique method of supporting the cutting arm during the coring process to make coring an enjoyable and effortless experience for even the novice turner. With...

Oneway 9” Easy Core Bowl Coring Knife Set, with Steel Cutter

Oneway 9” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is supplied...

Oneway 10" Easy Core System

Oneway 10" Easy Core System without clamp block. The mini coring systems are different from it's larger counterparts in that there is only one knife available for the mini systems (included with the system). Different sized cores are obtained by moving...

Oneway 16 1/4” Easy Core Bowl Coring Knife Set, with Steel Cutter

Oneway 16 1/4” Easycore Knife Set. There are four knife sets available for a complete system (sold separately.) Coring doesn't have to be a scary, unnerving experience anymore. Even novice turners with a bit of instruction (instructional video is...

Oneway 16” Easy Core Base System

Oneway 16” Easy Core base set without clamp block. The Oneway Easy-Core Coring System utilizes a unique method of supporting the cutting arm during the coring process to make coring an enjoyable and effortless experience for even the novice turner. With...

Oneway 20” Easy Core Base System

Oneway 20” Easy Core base set without clamp block. The Oneway Easy-Core Coring System utilizes a unique method of supporting the cutting arm during the coring process to make coring an enjoyable and effortless experience for even the novice turner. With...

Axminster Woodturning Live Revolving Center 2MT

With numerous large capacity lathes now available, we decided to design and make a bigger, high quality, heavy duty live tailstock centre specifically for woodturners, as in the past these centres have been produced for metalworkers. The Evolution centre...

Axminster Woodturning Pro Drive 2MT - 16mm

These centres are safe, secure and offer greater versatility and accuracy than the usual two or four prong drive centres. The centre features a spring loaded, stainless steel centre point and a sharp toothed outer ring which provides the drive. The...

Axminster Woodturning Hollow Live Center With Chip Ejection 2MT

An excellent improvement to our standard hollow live centre, this Evolution Series centre features three chip ejection ports so that during use the bit doesn't have to be completely withdrawn from the tailstock. With short and long removable points, twin...

Axminster Woodturning Revolving Center Ring Point Tip

The Ring Point applies pressure to your work over a relatively wide area making it particularly useful for delicate timber or soft wood liable to split. You can adjust the amount of compression to suit the timber. The 8mm diameter matches the ring drive...

Axminster Woodturning Revolving Center Dale Nish Tip

The Dale Nish Extended Nose Centre has a modified point. In place of the standard 60° is an 8mm long 30° point, giving better penetration into the wood and reducing the wedge effect, which helps minimise the risk of splitting.Features:Dale Nish Extended...

Axminster Woodturning Pro Drive 2MT - 21mm

These centres are safe, secure and offer greater versatility and accuracy than the usual two or four prong drive centres. The centre features a spring loaded, stainless steel centre point and a sharp toothed outer ring which provides the drive. The...

Axminster Woodturning Hollow Live Center With Chip Ejection 1MT

An excellent improvement to our standard hollow live centre, this Evolution Series centre features three chip ejection ports so that during use the bit doesn't have to be completely withdrawn from the tailstock. With short and long removable points, twin...

Axminster Woodturning 21mm Pro Live Center 2MT

The Axminster Evolution 21mm Pro Live Centre 2MT exactly matches the Axminster Evolution Series 21mm Pro Drive. Like the drive centre, it features a spring-loaded, stainless steel centre point. The spring tension is variable; the adjustment is a simple...

Axminster Woodturning Revolving Center Conical Tip

The Conical Centre is perhaps the most useful. The 28.5mm internal cone self-centres your work either for turning small spindles or sanding previously turned items. This also works exceptionally well as support on a curved surface or simply where the...

Axminster Woodturning Counterbore Drive 2MT

Equipped with a 5/16"(8mm) diameter locating pin, these centres are used for accurately locating and driving items such as lamp columns which have already been partly bored through from one end. Where this centre differs from other such centres is that...

Axminster Woodturning 16mm Pro Live Center 2MT

The Axminster 16mm Pro Live Centre 2MT exactly matches the Axminster 16mm Pro Drive. Like the drive centre, it features a spring-loaded, stainless steel centre point. The spring tension is variable; the adjustment is a simple matter of turning a grub...

Axminster Woodturning Pro Drive 1MT - 21mm

These centres are safe, secure and offer greater versatility and accuracy than the usual two or four prong drive centres. The centre features a spring loaded, stainless steel centre point and a sharp toothed outer ring which provides the drive. The...

Oneway Clamp Block for 2 5/8" Gap in Lathe Bed

Oneway Clamp Block for 2 5/8 Gap.Coring will save you time, save your energy, save your tools, save your wood, and can save on a huge amount of clean-up. All these things ultimately save you money! Coring is a very time effective method to make a bowl...