Cle-Line, M42 Cobalt 115 Piece Drill Bit Set, Fractional, Letter and Wire Sizes, 135 Degree Split Point

Cle-Line M42 Cobalt 115 Piece Drill Bit Set, Fractional, Letter and Wire Sizes, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which...

Cle-Line, M42 Cobalt 29 Piece Drill Bit Set, 1/16" - 1/2" x 64ths, 135 Degree Split Point

Cle-Line M42 Cobalt 29 Piece Drill Bit Set, 1/16" to 1/2" by 1/64" Sizes, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will...

Cle-Line, M42 Cobalt 15 Piece Drill Bit Set, 1/16" - 1/2" x 32nds, 135 Degree Split Point

Cle-Line M42 Cobalt 15 Piece Drill Bit Set, 1/16" to 1/2" by 1/32" Sizes, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will...

Cle-Line, M42 Cobalt 13 Piece Drill Bit Set, 1/16" - 1/4" x 64ths, 135 Degree Split Point

Cle-Line M42 Cobalt 13 Piece Drill Bit Set, 1/16" to 1/4" by 1/64" Sizes, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will...

Cle-line, M42 Cobalt Drill Bit, 6.80mm, 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 6.80 mm, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 7.00mm, 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 7.00 mm, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 5.50mm, 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 5.50 mm, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 5/32", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 5/32", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 5/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 5/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 5/16", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 5/16", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 5.10mm, 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 5.10 mm, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 31/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 31/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 3/8", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 3/8", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 3/32", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 3/32", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 29/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 29/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 3/16", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 3/16", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 25/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 25/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 27/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 27/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 21/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 21/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 23/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 23/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 9/64", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 9/64", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 9.50mm, 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 9.50 mm, 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...

Cle-line, M42 Cobalt Drill Bit, 9/32", 135 Degree Split Point

Cle-line M42 Cobalt Drill Bit, 9/32", 135 Degree Split PointThe Cle-Line drill bits are Made in the USA from M42 Cobalt Steel to exacting tolerances which will hold an edge much longer than HSS or...