Record Power 62833, Standard Wood Screw RH

This item is in stock and ready for immediate shipping from our warehouseThe SC3 and SC4 are supplied with the indispensable Record Power woodworm screw. Ideal for mounting bowl blanks, this screw is held in the jaws of the chuck, giving exceptional...

Record Power 62834, Standard Wood Screw LH

This item is in stock and ready for immediate shipping from our warehouseIdeal for mounting bowl blanks, this screw is held in the jaws of the chuck, giving exceptional holding power. This means a separate wood screw chuck doesn't need to be used and the...

Record Power 62835, Fastening Kit for Cole Jaws

This item is in stock and ready for immediate shipping from our warehouseThis set of spare fastenings is compatible with the Record Power 62356 Remounting Jaws Mini and 62377 Remounting Jaws Mega. It contains 8 standard profile rubber securing buffers...

Stainless Bottle Stoppers, Shop Smith Universal Mandrel with 13/16” Bushing

This item is in stock and ready for immediate shipping from our warehouseUniversal Mandrels come in various sizes for different spindles. The “turn to diameter” is set for Stainless Bottle Stoppers' Honey Dipper but they accept the bushings to change the...

Axminster, Long Chuck Key for the SK114 and SK100 Chucks

This item is in stock and ready for immediate shipping from our warehouseWhen larger work is to be turned it is often difficult to get the key down the side of the piece to tighten or loosen the chuck. To overcome this Axminster have produced a 255mm...

Axminster, Bottle Stopper Arbor, #1 MT

*PLEASE NOTE: THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURER. ONCE OUR CURRENT INVENTORY LEVELS ARE DEPLETED, IT WILL NO LONGER BE AVAILABLE FOR PURCHASE.This item is in stock and ready for immediate shipping from our warehouseIf you have turned any...

Axminster, Lathe Mounted Polishing Mop Arbor, #2 MT

This item is in stock and ready for immediate shipping from our warehouseAn arbor available with either 1 or 2 Morse taper at one end and a tapered thread on the other for mounting a polishing mop. A hollow recess is provided at the tip so that the...

Axminster, Light Pull Drive, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThe light pull drive is a friction drive with steps 1/8"(3.2mm), 1/4"(6.35mm), 3/8"(9.5mm), 1/2"(12.7mm) and 5/8"(16mm). Simply slip the blank onto the drive, bring up the tailstock...

Axminster, Cone Friction Drive Center, #2 MT

This item is in stock and ready for immediate shipping from our warehouseUsed in conjunction with the Ring and Centre Point Live Centre, this friction drive is ideal for small spindle turning. As the points on both ends are the same, the timber can be...

Axminster, Matched Pair Ring Centers, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThese matched ring centres are very safe to use if you are a newcomer to woodturning. This is due to the fact that if you experience a dig in, the workpiece will stop rotating but...

Axminster, Counterbore Drive Kit, #2 MT

This item is in stock and ready for immediate shipping from our warehouseEquipped with a 5/16" (8mm) diameter locating pin, this drive centre is used for accurately locating and driving items such as lamp columns which have already been partly bored...

Axminster, Pro Drive Center, 5/8" (16mm) Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThese centres are safe, secure and offer greater versatility and accuracy than the usual two or four prong drive centres. The centre features a spring loaded, stainless steel centre...

Axminster, Jumbo Drive Center, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThis somewhat oversize centre is particularly useful when turning large diameter pieces or roughing unbalanced work prior to chucking, as with end grain hollow forms. The principle...

Axminster, 4 Prong Drive Center, 5/8" Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouse4 Prong 16mm (5/8") diameter drive centres available in either 1MT or 2MT.Features:4 Prong16mm (5/8") diameter2MTMade entirely in Axminster, UK and is CNC manufactured for superb...

Axminster, Cone Friction Drive Center, #1 MT

This item is in stock and ready for immediate shipping from our warehouseUsed in conjunction with the Ring and Centre Point Live Centre, this friction drive is ideal for small spindle turning. As the points on both ends are the same, the timber can be...

Axminster, 4 Prong Drive Center, 3/8" Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouse4 Prong 9.5mm (3/8") diameter drive centres available in either 1MT or 2MT.Features:4 Prong9.5mm (3/8") diameter2MTMade entirely in Axminster, UK and is CNC manufactured for superb...