Axminster, GK100 Discovery Chuck Body Kit with 3/4" x 16 TPI Threaded Backplate (No Jaws)

The Axminster Woodturning Discovery GK100 Chuck is the perfect introduction for anyone looking to start woodturning. The GK100 Discovery chuck is ideal for a variety of lathe models but ideally more suited medium sized lathes. Supplied as the chuck only...

Hurricane Turning Tools, M4 x 8mm L FH Torx Screw, Fits Select Sorby, Penn State and Savannah Tools (5-Pack)

Replacement M4 x 8mm L FH Torx Screw for carbide turning tools, designed to fit Penn State, Ultra Carbide Chisel™ | Savannah, Mini Round | Sorby Turnmaster (Round) | Sorby Turnmaster (Square) | Sorby Turnmaster (Radius) | Penn State, Ultra Carbide...

Hurricane Turning Tools, #4-40 x 1/4" L FH Torx Screw, Fits Carter Hybrid and The AXE Tools (5-Pack)

Replacement #4-40 1/4" L FH Tox Screw designed to fit Carter, Hybrid™ Round, Carter, Hybrid™ Diamond and Carter, The AXE™ DiamondFeatures:Replacement Torx Screw (#8-32 x 3/8" Long) For Hurricane Pro Series Carbide CuttersFits Carter, Hybrid™ Round,...

Hurricane Turning Tools, M3 x 8mm L FH Torx Screw, Fits Penn State, Carbide Magic Tools (5-Pack)

Replacement M3 x 8mm L FH Torx Screw for carbide turning tools designed to fit Penn State, Carbide Magic Cove Master™, Pen Genie™ and Mini Diamond™Features:Replacement M3 x 8mm L FH Torx Screw for carbide turning toolsFits Penn State, Carbide Magic...

Hurricane Turning Tools, #8-32 x 1/4" L FH Torx Screw, Fits Carter The AXE, Round Tools (5-Pack)

Replacement screw: #8-32 x 1/4" L FH Torx Screw for carbide turning tools, designed to fit Carter The AXE, Round ToolsFeatures:Replacement screw: #8-32 x 1/4" L FH Torx Screw for carbide turning toolsFits Carter The AXE, Round ToolsMade from Stainless...

Hurricane Turning Tools, M6 x 8mm L FH Hex Screw, Fits Harrison Specialties Simple Rougher (5-Pack)

Hurricane Turning Tools, M6 x 8mm L FH Hex Screw for carbide turning toolsFeatures:Hurricane Turning Tools, M6 x 8mm L FH Hex ScrewHarrison Specialties, Simple Rougher™Made from black-oxide alloy steelLength: 8mmThread Size: M6Requires 4mm HexHurricane...

Axminster, SK114 Evolution, Chuck Body with Key, 1 1/4" x 8 TPI Direct Thread (2025 Version)

More than thirty-five years ago, Axminster produced and marketed one of the world's first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the feedback and input of professional woodturners. With over...

Axminster, Pen Jaws for the GK88 Discovery Chuck

Axminster Woodturning have recreated some of our most popular jaws in a smaller size to accommodate the Discovery GK88 chuck. The Axminster Woodturning Pen Jaws allow you to drill pen blanks with confidence, knowing the result will be accurate and...

Axminster, Dovetail Jaws Type A for the GK88 Discovery Chuck

Axminster Woodturning have recreated some of our most popular jaws in the smaller size to accomodate the 88mm Discovery Chuck. The Axminster Woodturning Type A Dovetail Jaws are a great general purpose jaw set. Ideal for turning bowls, plates, the...

Axminster, Gripper Jaws Type H for the GK88 Discovery Chuck

Axminster Woodturning have recreated some of our most popular jaws in a smaller size to accommodate the Discovery GK88 chuck. The Axminster Woodturning Gripper Type H Jaws are ideal for smaller hollow form and similar pieces. The jaws feature serrations...

Axminster, Dovetail Jaws Type C for the GK88 Discovery Chuck

Axminster Woodturning have recreated some of our most popular jaws in a smaller size to accommodate the Discovery GK88 chuck. The Type C jaws expand into a 55mm recess. The 42mm diameter internal grip has a stepped shoulder, for an extra firm grip on...

Axminster, Matched Pair Ring Centers, #1 MT

This item is currently out of stock at our warehouse.These matched ring centres are very safe to use if you are a newcomer to woodturning. This is due to the fact that if you experience a dig in, the workpiece will stop rotating but the drive centre can...

Axminster, 4 Prong Drive Center, 1" Diameter, #3 MT

This item is currently out of stock at our warehouse.4 Prong 25mm (1") diameter drive centres available in either 1, 2 or 3MT.Features:4 Prong25mm (1") diameter3MTAll sizes in inches are for reference only and are not as accurate as the sizes shown in...

Axminster, GK88 Discovery Chuck Body Kit with 3/4" x 16 TPI Threaded Backplate (No Jaws)

The Axminster Woodturning GK88 Discovery Chuck is the perfect introduction for anyone looking to start woodturning. It is the smallest in the range of Axminster Chucks; its light and compact size makes it ideal for a variety of lathe models but ideally...

Axminster, Discovery Chuck Backplate with 1.1/4" x 8 TPI Threads

For use with the Axminster Woodturning Discovery chucks, these woodturning backplates allow you to keep your chuck body (GK88, GK100 or SK100) when upgrading your lathe. Save time and money and simply choose the suitable backplate size for your new lathe...

Axminster, Discovery Chuck Backplate with 1" x 8 TPI Threads

For use with the Axminster Woodturning Discovery chucks, these woodturning backplates allow you to keep your chuck body (GK88, GK100 or SK100) when upgrading your lathe. Save time and money and simply choose the suitable backplate size for your new lathe...