Lathe Drive Centers

Axminster, Lathe Mounted Polishing Mop Arbor, #2 MT

This item is in stock and ready for immediate shipping from our warehouseAn arbor available with either 1 or 2 Morse taper at one end and a tapered thread on the other for mounting a polishing mop. A hollow recess is provided at the tip so that the...

Axminster, Light Pull Drive, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThe light pull drive is a friction drive with steps 1/8"(3.2mm), 1/4"(6.35mm), 3/8"(9.5mm), 1/2"(12.7mm) and 5/8"(16mm). Simply slip the blank onto the drive, bring up the tailstock...

Axminster, Cone Friction Drive Center, #2 MT

This item is in stock and ready for immediate shipping from our warehouseUsed in conjunction with the Ring and Centre Point Live Centre, this friction drive is ideal for small spindle turning. As the points on both ends are the same, the timber can be...

Axminster, Matched Pair Ring Centers, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThese matched ring centres are very safe to use if you are a newcomer to woodturning. This is due to the fact that if you experience a dig in, the workpiece will stop rotating but...

Axminster, Pro Drive Center, 5/8" (16mm) Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThese centres are safe, secure and offer greater versatility and accuracy than the usual two or four prong drive centres. The centre features a spring loaded, stainless steel centre...

Axminster, Jumbo Drive Center, #2 MT

This item is in stock and ready for immediate shipping from our warehouseThis somewhat oversize centre is particularly useful when turning large diameter pieces or roughing unbalanced work prior to chucking, as with end grain hollow forms. The principle...

Axminster, 4 Prong Drive Center, 5/8" Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouse4 Prong 16mm (5/8") diameter drive centres available in either 1MT or 2MT.Features:4 Prong16mm (5/8") diameter2MTAll sizes in inches are for reference only and are not as accurate...

Axminster, 4 Prong Drive Center, 3/8" Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouse4 Prong 9.5mm (3/8") diameter drive centres available in either 1MT or 2MT.Features:4 Prong9.5mm (3/8") diameter2MTAll sizes in inches are for reference only and are not as accurate...

Axminster, Counterbore Drive, #2 MT

This item is in stock and ready for immediate shipping from our warehouseEquipped with a 5/16" (8mm) diameter locating pin, these centres are used for accurately locating and driving items such as lamp columns which have already been partly bored through...

Oneway, Modified Cup Drive Center, 5/16 Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouseOneway Modified #2 MT safe Driver (5/16)Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and...

Oneway, Modified Cup Drive Center, 3/8 Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouseOneway Modified #2 MT safe Driver (3/8)Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and...

Oneway, Cup Drive Center, #2 MT

This item is in stock and ready for immediate shipping from our warehouseOneway #2 MT Safe Driver - Cup DriveOneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle...

Oneway, Screw Chuck, #2 MT

This item is in stock and ready for immediate shipping from our warehouseOneway #2 MT Screw ChuckOneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. ...

Axminster, Bottle Stopper Arbor, #2 MT

This item is in stock and ready for immediate shipping from our warehouseIf you have turned any of our wine bottle stopper kits, you will appreciate the usefulness of this simple device. After drilling your chosen blank and securing the screw from the...

Hurricane, Crown Spur Drive Center, 1" Diameter, #2 MT

This item is part of our Buy 5 Save 50% Promotion. Learn more or find additional items on this page.This item is currently out of stock at our warehouse.Hurricane Standard Series 1" Crown Drive Center. The crown drive center is a popular method of...

Hurricane, 4 Prong Drive Center, 1" Diameter, #2 MT

This item is in stock and ready for immediate shipping from our warehouseHurricane Standard Series 4 Prong Drive Center. The 4 prong drive center is the most common method of driving a workpiece between centers on the lathe. This center is 1" in diameter...