Hurricane, Pro Series, 28mm x 10mm Diamond Carbide Insert

Product Description

The Hurricane Turning Tools, Pro Series, 28mm x 10mm Diamond Carbide Insert (HTT-457-PRO) fits the Hurricane Full-Size Detailer as well as tools from comparable brands that accept 28mm x 10mm (diamond) by 2.5mm thick inserts. Upon receiving your Hurricane Pro Cutter, we recommend marking it with a magic marker and storing it separately to ensure it doesn't get mixed up with other cutters.

Please note: This cutter comes with a 4-40 screw (5/16" length) which fits Hurricane Carbide Tools as well as most other brands, however, certain tools may require a different type of screw. If your tool does not accept a 4-40 screw (5/16" length), you will have to use the proper sized screw (not included). The screw that comes with this cutter requires a T10 size Torx bit.

Experience the superior performance of Hurricane Pro Series Carbide Cutters! They are ideal for use on a wide range of materials including hardwoods, softwoods, acrylic and resin. Each cutter is German engineered and made from C3+ carbide steel which is known for its exceptional edge retention and cutting efficiency. Unlike lower-quality alternatives, these cutters stay sharper longer, allowing you to spend more time turning and less time replacing cutters.

• This Hurricane Turning Tools Pro Series Replacement Cutter is 28mm x 10mm diamond and 2.5mm thick with a 30 degree cutting angle. Each cutter includes a Torx screw (4-40). Requires a T10 size Torx bit (not included).
• Made in Germany: Each carbide cutter is manufactured in Germany using top-quality C3 carbide steel and is assembled in America.
• Hurricane Pro Series Carbide Cutters are manufactured using C3 carbide steel, which will hold an edge longer!
• Turn a variety of materials using the same cutter - our cutters work great on hard woods, soft woods, acrylic, resin and more!
• Fits the Hurricane Full-Size Detailer as well as comparable brands that accept 28mm x 10mm diamond by 2.5mm thick inserts.

• Compatible with the following tools:
• Hurricane, Mid-Size Detailer (HTT-402)
• Hurricane, Full Size Detailer (HTT-412)
• Easy Wood Tools, Easy Start Detailer™ (9720)
• Easy Wood Tools, Full Size Easy Detailer™ (7500)
• Easy Wood Tools, Mid Size Easy Detailer™ (7300)
• Penn State, Ultra Carbide Chisel™ (Requires M4 FH Torx screw, not included)
• Penn State, Mini Diamond™ (Requires M3 FH Torx screw, not included)
• Carter, The AXE™ Diamond (Requires 4-40 - 1/4" FH Torx screw, not included)
• Carter, Hybrid™ Diamond (Requires 4-40 - 1/4" FH Torx screw, not included)
• Easy Wood Tools, Mini Easy Detailer™ (7200)

• Check out the PRODUCT VIDEOS tab above to watch videos related to this product
• View our Carbide Cutter Compatibility Chart to find the right cutter for your tool! Web Version | PDF Version (Printable)
• Looking for replacement screws? Find them here.
• Looking for T10 L-Key? Find them here.



⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust

012026