Hurricane, Pro Series, 15mm Round Carbide Insert + Screw

Product Description

The Hurricane Turning Tools, 15mm Round Carbide Insert (HTT-452-PRO) fits the Hurricane Full-Size Finisher as well as tools from comparable brands that accept 15mm (round) by 3.0mm thick inserts. Upon receiving your Hurricane Pro Cutter, we recommend marking it with a magic marker and storing it separately to ensure it doesn't get mixed up with inferior cutters.

PLEASE NOTE: This cutter comes with a #8-32 screw (3/8" length) which fits Hurricane Carbide Tools as well as most other brands, however, certain tools may require a different type of screw. If your tool does not accept a #8-32 (3/8" length) screw, you will have to purchase the proper screw separately. The screw that comes with this cutter requires a T20 size Torx bit.

Experience the superior performance of Hurricane Pro Series Carbide Cutters! They are ideal for use on a wide range of materials including hardwoods, softwoods, acrylic and resin. Each cutter is German engineered and made from C3+ carbide steel which is known for its exceptional edge retention and cutting efficiency. Unlike lower-quality alternatives, these cutters stay sharper longer, allowing you to spend more time turning and less time replacing cutters.

• This Hurricane Pro Series Replacement Cutter is 15mm round and 3.0mm thick with a 30 degree cutting angle. Each cutter includes an upgraded Torx screw (#8-32). Requires a T20 size Torx bit (not included).
• Made in Germany, Assembled in America: Each carbide cutter is manufactured in Germany using top-quality C3+ carbide steel and is assembled in America.
• Hurricane Pro Series Carbide Cutters are German-engineered using C3+ carbide steel, which will hold an edge longer than comparable Chinese products!
• Turn a variety of materials using the same cutter - our cutters work great on hard woods, soft woods, acrylic, resin and more!
• Fits the Hurricane Full-Size Finisher as well as comparable brands that accept 15mm (round) by 3.0mm thick inserts.

• Compatible with the following tools:
• Hurricane, Full-Size Finisher (HTT-410)
• Harrison Specialties, Simple Finisher™
• Harrison Specialties, Simple Hollowing Tool™
• Harrison Specialties, Simple Swan Neck Hollower™
• Sorby Turnmaster - Round (Requires M4 screw, not included)
• Simple Woodturning Tools, Full Size Turner™
• Simple Woodturning Tools, Simple Swan & Hollower™
• Easy Wood Tools, Full Size Easy Finisher (4200)
• Carter, The Axe Round (Requires #8-32 - 1/4" FH Torx screw, not included)
• Savannah Large Round
• Woodpecker, Full Size Round

• Check out the PRODUCT VIDEOS tab above to watch videos related to this product
• View our Carbide Cutter Compatibility Chart to find the right cutter for your tool! Web Version | PDF Version (Printable)
• Looking for replacement screws? Find them here.
• Looking for T20 L-Key? Find them here.



⚠ WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer.  Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection.  For more information go to http://www.P65Warnings.ca.gov/fact-sheets/wood-dust

012726