Four Jaw Chucks

Hurricane, Chuck Key Wrench for the HTC100 and HTC125 Chucks

This item is in stock and ready for immediate shipping from our warehouseHurricane Turning Tools woodturning chuck key wrenchFeatures:Chuck Key for Hurricane ChucksUsed to open and close chuck jawsHurricane Turning Tools is a premium brand of tools and...

Axminster Woodturning, Discovery GK100 Chuck Body Only with 3/4" x 16 TPI Backplate (No Jaws)

The Axminster Woodturning Discovery GK100 Chuck is the perfect introduction for anyone looking to start woodturning. The GK100 Discovery chuck is ideal for a variety of lathe models but ideally more suited medium sized lathes. Supplied as the chuck only...

Axminster Woodturning, Discovery GK88 Chuck Body Only with 3/4" x 16 TPI Backplate (No Jaws)

The Axminster Woodturning GK88 Discovery Chuck is the perfect introduction for anyone looking to start woodturning. It is the smallest in the range of Axminster Chucks; its light and compact size makes it ideal for a variety of lathe models but ideally...

Record Power, 62322, Heavy Bowl and Gripper Jaws for the SC3 and SC4 Chuck

This item is currently out of stock at our warehouse.These new jaws are ideal for heavy bowls and vases. The wide front face provides a good register for the base of the bowl or vase and the deep toothed body provides strong grip on the spigot. The...

Easy Wood Tools, Model CJ225, 1 3/8" Easy Reach Dovetail Jaws™

Easy Wood Tools, Model CJ225, 1 3/8" Easy Reach Dovetail JawsFeatures:1 3/8" Easy Reach Dovetail JawsGrips (tenons): 1 3/8" | Expands (recesses): 2" | Jaw Length: 1 1/4"Easy Jaws are held in place by the chuck body, not screws that are susceptible to...

Easy Wood Tools, Model C2000, 4" Easy Chuck™ with 1 1/4" x 8 TPI Direct Thread

Easy Wood Tools Model C2000 4" Woodturning Easy Chuck fits lathes with 1 1/4" - 8 SpindlesThe 4-Jaw Easy Chuck™ is a 4” woodturning chuck featuring the Easy Jaws™ System with patented Snap-Lock Technology SLT™ allowing 30-second jaw changes, with no...

Easy Wood Tools, Model C1000, 4" Easy Chuck™ with 1" x 8 TPI Direct Thread

Easy Wood Tools Model C1000 4" Woodturning Easy Chuck fits lathes with 1" - 8 SpindlesThe 4-Jaw Easy Chuck™ is a 4” woodturning chuck featuring the Easy Jaws™ System with patented Snap-Lock Technology SLT™ allowing 30-second jaw changes, with no screws...

Axminster, Dovetail Jaws Type A for the SK88 Essential Chuck

This item is in stock and ready for immediate shipping from our warehouseAxminster Woodturning have recreated some of the most popular jaws in the smaller size to accommodate the 88mm Essential Chuck. The Axminster Woodturning Type A Dovetail Jaws are a...

Axminster, O’Donnell Dovetail Jaws for the SK88 Essential Chuck

*PLEASE NOTE: This item has been discontinued by the manufacturer. The SK88 Essential Chuck has been replaced by the GK88 Discovery Chuck.This item is in stock and ready for immediate shipping from our warehouseAxminster Woodturning have recreated some...

Record Power 62572, 3 1/2” Faceplate Ring for the SC3 and SC4 Chuck

This item is currently out of stock at our warehouse.This faceplate ring is ideal for holding medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set...

Axminster, Gripper Jaws Type H for the SK80 Chuck

This item is currently out of stock at our warehouse.Gripper jaws feature serrations on the inner and outer gripping surfaces. This particular design offers a super strong grip on end grain and in green timber. The depth of the jaw adds to the gripping...

Axminster, Dovetail Jaws Type D for the SK80 Chuck

*PLEASE NOTE: THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURER.This item is currently out of stock at our warehouse.These are a version of our popular small dovetail jaws, made to fit the SK80 chuck, although they are also suitable for the SK100 4"...

Axminster, Jaw Rack

This item is currently out of stock at our warehouse.This simple rack for your chuck jaws helps to keep the jaws organised, stored safely and to hand when needed. It is so much easier to work if your accessories are readily accessible rather than...

Axminster, O'Donnell Dovetail Jaws, 3-in-1 Set

This item is currently out of stock at our warehouse.The O'Donnell Jaws 3 in 1 package comprises a 50mm (2") O’Donnell Dovetail jaws along with both 38mm (1 1/2") and 25mm (1") O’Donnell inserts. The inserts fit inside the 50mm jaws, each secured with a...

Axminster, Accessory Mounting Jaws for the SK100 Chuck

This item is currently out of stock at our warehouse.These accessory mounting jaws are the latest accessory in the evolution of the Axminster Clubman SK100 4" chuck. Manufactured in Axminster, they are a precision fit in the SK100’s jaw slides. An...

Axminster, 25mm Cylinder Jaws

*PLEASE NOTE: THIS ITEM HAS BEEN DISCONTINUED BY THE MANUFACTURER.This item is currently out of stock at our warehouse.When turning long and thin projects it's a great advantage to be able to grip a blank along a substantial amount of its length to...