Oneway 1 1/2" Jumbo Wood Screw, RH

1 1/2" RH Jumbo Screw. The ONEWAY Woodworm Screw (Jumbo Screw) design has several unique features which make it a superior wood screw for the turner.Oneway chucks have been designed by a machinist with engineering input from material, heat treating, and...

Oneway Mini Jumbo Jaws for the Oneway and Talon Chuck

Oneway Mini Jumbo Jaws for the Oneway and Talon Chuck. Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. The buttons are hard rubber pressed over a...

Oneway Mini Jumbo Jaws for the Stronghold Chuck

Oneway Mini Jumbo Jaws for the Stronghold Chuck. Their unique combination of slots and tapped holes for mounting the rubber grippers allows holding an infinite number of round, oval or square shapes. The buttons are hard rubber pressed over a tapered...

Oneway Pen Turning Point

Oneway Pen Turning Point is small, made from steel, and attaches to the Live Center.Oneway makes some of the finest lathe accessories for woodturning. They offer a full line of Live Centers, Drive Centers, Tool Rests and Spindle Adapters. They are made...

Oneway Pen Turning Jaws for the Talon Chuck

Oneway Pen Turning Jaws for the Talon Chuck.Oneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of...

Oneway Talon Chuck Kit with 1 1/4" x 8 TPI Insert and #2 Profiled Jaws

Oneway Talon Chuck Kit With 1 1/4" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping...

Oneway Chuck Kit with 1" x 8 TPI Insert and #2 Profiled Jaws

Oneway Chuck Kit With 1" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of square...

Oneway Talon Chuck Kit with 1" x 8 TPI Insert and #2 Profiled Jaws

Oneway Talon Chuck Kit With 1" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of...

Oneway Stronghold Chuck Kit with 1" x 8 TPI Insert and #2 Profiled Jaws

Oneway Stronghold Chuck Kit With 1" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow...

Oneway Talon Chuck Kit with M33 x 3.5 Insert and #2 Profiled Jaws

Oneway Talon Chuck Kit With M33 x 3.5 InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of...

Oneway Chuck Kit with 3/4" x 16 TPI Insert and #2 Profiled Jaws

Oneway Chuck Kit With 3/4" x 16 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of...

Oneway Stronghold Chuck Kit with 1 1/4" x 8 TPI Insert and #2 Profiled Jaws

Oneway Stronghold Chuck Kit With 1 1/4" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow...

Oneway Stronghold Chuck Kit with 1 1/2" x 8 TPI Insert and #2 Profiled Jaws

Oneway Stronghold Chuck Kit With 1 1/2" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow...

Oneway Chuck Kit with 1 1/4" x 8 TPI Insert and #2 Profiled Jaws

Oneway Chuck Kit With 1 1/4" x 8 TPI InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of...

Oneway Chuck Kit with M33 x 3.5 Insert and #2 Profiled Jaws

Oneway Chuck Kit With M33 x 3.5 InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of square...

Oneway Stronghold Chuck Kit with M33 x 3.5 Insert and #2 Profiled Jaws

Oneway Stronghold Chuck Kit With M33 x 3.5 InsertOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping...

Oneway Base Jaws for the Talon Chuck

Oneway Base Jaws for the Talon ChuckOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of square or...

Oneway #4 Profiled Tower Jaws for the Stronghold Chuck

Oneway #4 Profiled Tower Jaws for the Stronghold ChuckOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow...

Oneway 1" Chuck Spur

Oneway 1" Chuck Spur for spindle work. Fits all Oneway ChucksOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks...

Oneway #1 Profiled Spigot Jaws for the Talon Chuck

Oneway #1 Profiled Spigot Jaws for the Talon ChuckOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow...

Oneway 1/2" Chuck Spur

Oneway 1/2" Chuck Spur for spindle work. Fits all Oneway ChucksOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks...

Oneway #1 Profiled Spigot Jaws for the Oneway Chuck

Oneway #1 Profiled Spigot Jaws for the Oneway ChuckOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow...

Oneway #3 Profiled Serrated Jaws for the Talon Chuck

Oneway #3 Profiled Jaws for the Talon ChuckOneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner's every need. Four jaws chucks allow clamping of...

Oneway 2" Jumbo Wood Screw, RH

Oneway 2" Long Jumbo Wood Screw RH (Right and Left Hand) for large projects. The Oneway Woodworm Screw (Jumbo Screw) design has several unique features which make it a superior wood screw for the turner.Oneway chucks have been designed by a machinist...