Axminster Woodturning 13 mm Keyed Chuck B16

A good general purpose drill chuck with no arbor, suitable for use in pillar drills and lathes. The jaws close right down to almost nothing for use with very small drill bits. Jaw opening range is...

Axminster Woodturning External Safety Jaw Set

These stepped jaws fit into the chuck in place of the accessory mounting jaws to provide a selection of internal and external parallel gripping surfaces. They are made by us in Axminster using the...

Axminster Woodturning Deep Grip Jaws

A very versatile SK114 4 1/2" jaw set; originally designed for the SK114 4 1/2" chuck but is equally suitable for use on the SK100. Initially named Piranha jaws, due to their incredible ‘bite’ they...

Axminster Woodturning Pen Jaws

Drilling a pen blank can be tricky; the hole needs to be central, straight and round. While various jigs are available for doing the job on a Pillar drill, by far the best method is to do the job on...

Axminster Woodturning SK114 Dovetail Jaws Type C

A larger diameter version of one of our most versatile and popular jaw sets, the SK114 4 1/2" Dovetail Type C jaws expand into a 70mm dovetailed recess and have a stepped shoulder for an internal...

Axminster Woodturning Faceplate Ring For Use With Type F Dovetail Jaws

Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the...

Axminster Woodturning Button Jaws - 150mm

At 150mm diameter, these jaws allow you to reverse chuck smaller workpieces quickly and securely at the turn of a chuck key. The conical rubber buttons pull your work gently back against the...

Axminster Clubman SK100 Woodturning Chuck - 3/4" x 16 TPI

More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the...

Axminster Woodturning Faceplate Ring For Use With Type C Dovetail Jaws

Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the...

Axminster Woodturning O'Donnell Dovetail Jaw Insert - 25mm

These inserts fit into the 50mm Axminster SK100 4" O’Donnell Dovetail Jaws. Held in place by four cap head screws they are relatively quick to fit. These inserts change the gripping range of the 50mm...

Axminster Woodturning SK80 Screw Chuck

The SK80 Type C screw chuck is a convenient method for mounting a turning blank onto the lathe without having to remove the chuck. The stepped mounting plate locates securely into the recess of SK80...

Axminster Woodturning SK80 Faceplate Ring

This faceplate ring has an internal chamfer which matches the dovetail on the 80mm C Jaws. The ring is attached to the timber with woodscrews, placed over the jaws on the chuck and the jaws opened up...

Axminster Woodturning SK80 Gripper Jaws Type H

Gripper jaws feature serrations on the inner and outer gripping surfaces. This particular design offers a super strong grip on end grain and in green timber. The depth of the jaw adds to the gripping...

Axminster Woodturning O'Donnell Dovetail Jaw Insert - 38mm

These inserts fit into the 50mm Axminster SK100 4" O’Donnell Dovetail Jaws. Held in place by four cap head screws they are relatively quick to fit. These inserts change the gripping range of the 50mm...

Axminster Woodturning Dovetail Jaws Type M

SK100 4" Dovetail Jaws Type M; where M stands for Mega, maybe a clue as to their intended function. The Type M jaws are one of the largest available for the Axminster precision chuck system. When at...

Axminster Clubman SK100 Woodturning Chuck Package - 1.1/4" x 8 TPI

More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the...

Axminster Woodturning Gripper Jaws Type H

SK100 4" Type H Gripper Jaws offer a good grip range for medium to large timber blanks. The gripping surfaces have serrations on both the internal and external walls. This design ensures a truly...

Axminster Woodturning Faceplate Ring For Use With Type B Dovetail Jaws

Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the...

Axminster Woodturning Colossus Gripper Jaws

For turning where size matters and projects include very large hollow forms and big bowls and platters. The SK100 4" Colossus Gripper Jaws offer greatly increased work holding capacity. Based on the...

Axminster Clubman SK80 Woodturning Chuck - 1" x 8 TPI

More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the...

Axminster Woodturning SK80 Dovetail Jaws Type D

These are a version of our popular small dovetail jaws, made to fit the SK80 chuck, although they are also suitable for the SK100 4" and SK114 4 1/2" chucks. The SK80 Dovetail Jaws Type D expand into...

Axminster Clubman SK100 Woodturning Chuck Package - 3/4" x 16 TPI

More than thirty-five years ago, Axminster produced and marketed one of the world’s first four jaw self centring chucks for woodturners. Over the years, much of the development has come from the...

Axminster Woodturning Gripper Jaws Type G

Specially designed to give a truly powerful grip, particularly on large diameter parallel pieces. The SK100 4" Gripper Jaws Type G have a large external dovetail and a serrated inner jaw surface...

Axminster Woodturning Faceplate Ring For Use With Type A Dovetail Jaws

Made to match the A, B, C and F dovetail jaws, these rings do away with the need for a separate faceplate on which to mount a bowl blank prior to turning the outside. Simply screw the ring to the...